The short answer
For oyster and shellfish farming, choose heavy-gauge PVC chest waders (700gsm or more) with double-welded seams, reinforced knees and integrated boots with a grippy, oil-resistant sole. If your site requires safety footwear, add a steel toe cap and midsole. Our Stormtide W663 covers most aquaculture work; the W665ST is the heavy-duty option.
700–1100gsm
Oil-resistant PVC
Double-welded
Seams throughout, no stitching
−25°C
Lab-tested cold rating
Dunlop boots
Acifort JobGUARD safety boots on the W665ST
Oyster and shellfish farmers spend long shifts in saltwater, working tidal beds, hauling bags and maintaining trestles over shell, mud and steel. Cheap waders don’t last long in that environment.
Below is what to look for in chest waders for oyster farming and aquaculture, and how our two industrial waders compare.
Stormtide W663 vs W665ST at a glance
| Stormtide W663 | Stormtide W665ST | |
|---|---|---|
| PVC weight | 700gsm, oil-resistant | 1100gsm, oil-resistant |
| Seams | Double-welded throughout | Double-welded throughout |
| Boots | Dunlop wellingtons (non-safety) | Dunlop Acifort JobGUARD safety boots |
| Toe and underfoot | Standard | Steel toe cap and steel midsole (ASTM F2413-24 I/C PR SRO) |
| Sole | Nitrile: resists oils, fats, acids and organic solvents | Anti-slip, chemical-resistant |
| Knees | Reinforced | Reinforced |
| Fit | Drawstring chest, elasticated adjustable braces, room for layers | Drawstring chest, elasticated adjustable braces, room for layers |
| Sizes | UK 7–11 (EU 41–45) | UK 7–13 (EU 41–47) |
| Best for | Most oyster, shellfish and fish farm work | Sites needing safety boots; cages, machinery and chemicals |
What to look for in aquaculture chest waders
Heavy-gauge PVC that resists punctures
Oyster shell, cage edges and rough seabeds will shred lightweight waders. The fabric weight in gsm (grams per square metre) is the best quick guide to how much punishment a wader can take.
PVC weight compared
The W665ST uses 57% heavier PVC than the W663.
The W663 is made from 700gsm oil-resistant PVC. The W665ST goes up to 1100gsm and is our heaviest PVC chest wader. Both have reinforced knees, where wear is heaviest when you’re kneeling on shell and gravel.
Double-welded seams, not stitching
Stitched seams leave needle holes that can let water in. Every seam on Stormline PVC waders is double-welded, so the PVC is bonded together with no stitching at all. They stay waterproof however you bend, kneel or reach.
Boots that grip and protect
Wet trestles, mud and algae-covered surfaces mean the boot matters as much as the wader. On both models the boots are built into the wader as one unit, so there’s no join for water to get in.
Safety boots fitted as standard
The W665ST comes with Dunlop Acifort JobGUARD safety boots: a steel toe cap, a steel midsole to protect against punctures underfoot, and a snug fit that stops heel slip. They meet ASTM F2413-24 I/C PR SRO.
The W663 has Dunlop non-safety wellingtons. Both have nitrile soles that resist oils, fats, acids and organic solvents, with a tread designed for wet, slippery ground. If your site requires safety footwear, or you’re working around cages and machinery, choose the W665ST.
Comfort and freedom of movement
Aquaculture work is physical: bending, lifting and walking against the tide. Both waders have elasticated, adjustable braces that move with you, a drawstring at the chest for a secure fit in deeper water, and a relaxed cut that leaves room for thermal layers. An internal chest pocket keeps your phone and gloves dry.
Gear that stays flexible in the cold
Most brands don’t publish a cold rating. Stormline PVC is lab tested to −25°C, so waders left in the truck overnight are still supple the next morning instead of frozen stiff. The PVC is backed with polyester or nylon rather than cotton, so it dries quickly between shifts.
Amazing quality, comfortable for all day wear as a commercial fisherman, hopefully some more sizes available eventually
Ben Hattam, verified owner, Stormtide W663
What else to wear for aquaculture work
Chest waders are the most important item, but you’ll also want:
- A waterproof jacket for the upper body in bad weather. The Stormtex 248G is a popular midweight PVC jacket, especially in green, and the Stormtex-Air 203 is the most flexible to work in.
- A warm mid-layer for cold winter tides. The Atlantic 809 fleece/PVC pullover layers comfortably under waders.
- Waterproof gloves for grip and protection when handling oysters and cages.
Why Stormline
1966
Founded in Southland, New Zealand
3rd
Generation family business
60 years
Making commercial waterproof workwear
Europe
Where our waders are made
Stormline started in Southland, New Zealand, where freezing gales and sideways rain are normal working weather. Sixty years and three generations later, we’re still a family business, best known for gear for commercial fishing crews. That means it’s built to last at sea, not just to look the part. Read more about Stormline.
Kitting out a team or ordering several pairs for your farm? Contact us for trade pricing.
Frequently asked questions
Which chest waders are best for oyster farming?
For most oyster and shellfish work, the Stormtide W663 (700gsm PVC, Dunlop non-safety wellingtons). If your site requires safety footwear, or you work around cages and machinery, choose the Stormtide W665ST (1100gsm PVC, Dunlop Acifort JobGUARD boots with steel toe cap and steel midsole).
Are the boots removable?
No. On both waders the boots are built into the wader as a single unit, so there is no leak point at the join.
Can I wear thermals underneath?
Yes. Both waders have a relaxed fit with room for mid-layers, plus a drawstring chest and adjustable elasticated braces to fine-tune the fit.
Do PVC waders go stiff in the cold?
Not Stormline’s. Our PVC is lab tested to −25°C and stays supple in freezing conditions, even after a night left in the truck.
What size should I order?
Order your normal boot size. The W663 comes in UK 7–11 and the W665ST in UK 7–13. Each product page has a size guide.
Are they oil and chemical resistant?
Yes. The PVC is oil-resistant, and the nitrile soles resist oils, fats, acids and organic solvents. For harsh chemicals, check that PVC is compatible with the specific substances you work with.
Can PVC waders be repaired?
Small tears and punctures in PVC can often be repaired. See our guide to repairing PVC rain gear.