🇺🇸 Ships from Philadelphia, PA | 30-day returns | Shop Now 🇺🇸

Wet Weather Gear for Tradies: Heavy-Duty Rain Gear for NZ Building Sites, Civil Crews and Processing Plants

Building sites, civil jobs and processing plants wear out rain gear fast. Concrete and steel rub through thin fabric, stitched seams start to leak, and cheap PVC goes stiff and cracks in the cold.

Stormline started in Southland in 1966 and is still a third-generation family business. We are best known for commercial fishing gear, which has to be built tough, and the same heavy PVC and welded seams go into our commercial range for building sites, civil and roading crews, pressure washing, food processing and council work. Below are the jackets, bibs and aprons we recommend for each job, and what to check before you buy for a crew.

In short

  • Building sites and civil: Stormtex 248G jacket + 669HG bib (500gsm PVC).
  • Active work and pressure washing: Stormtex-Air 203 jacket + 652 bib (340gsm stretch PVC).
  • Food processing: 999ST or 999HWST apron with PVC or neoprene sleeves.
  • All PVC gear: double-welded seams, oil-resistant, flexible to −25°C.
NZ heritage since 1966
Third-generation family business
Double-welded seams
No needle holes to leak
Published PVC weights
340gsm to 650gsm
Cold rated
Lab tested to −25°C / −13°F

Wet weather work gear for tradies: our picks

For most site work, a heavy PVC jacket with a bib and brace keeps a tradie dry all day. Pick the 500gsm Stormtex 248G and 669HG for the hardest wear, or the 340gsm stretch Stormtex-Air 203 and 652 when you need to move.

Toughest
Stormtex 248G jacket
  • 500gsm oil-resistant PVC
  • YKK zip with velcro storm flap
  • Raglan sleeves, elastic cuffs
Best for: Building sites, civil and roading
View the 248G →
Reversible
Stormtex 669HG bib and brace
  • 500gsm oil-resistant PVC
  • Fully reversible to last longer
  • 38mm elastic braces, ankle snaps
Best for: Pairs with the 248G jacket
View the 669HG →
Stretch
Stormtex-Air 203 jacket
  • 340gsm stretch PVC with PU coating
  • Adjustable hood that fits over a helmet
  • Large front utility pockets
Best for: Active site work, pressure washing
View the 203 →
Stretch
Stormtex-Air 652 bib and brace
  • 340gsm stretch PVC, double layer on legs
  • Knee pads and high back
  • 38mm straps with industrial clips
Best for: Pairs with the 203 jacket
View the 652 →

Heavy-duty wet weather gear by trade

Match the PVC weight to the wear. Building and civil crews need abrasion-resistant 500gsm PVC, people who climb, kneel and lift all day are better in 340gsm stretch PVC, and processing and washdown staff need a heavy apron and sleeves.

TradeJacketBottoms or apronPVC weight
Building sitesStormtex 248GStormtex 669HG bib500gsm
Civil and roading crewsStormtex 248G or Stormtex-Air 203669HG or 652 bib340–500gsm
Pressure washing and cleaningStormtex-Air 203Stormtex-Air 652 bib340gsm stretch
Meat and food processingOptional, under the apron999ST or 999HWST apron, plus sleeves500–650gsm apron
Council and utility crewsStormtex 248G or Stormtex-Air 203669HG or 652 bib340–500gsm

Building sites

The Stormtex 248G jacket is 500gsm oil-resistant PVC with a heavy-duty YKK zip, a velcro storm flap and raglan sleeves, so the 248G jacket still lets you reach overhead. The Stormtex 669HG bib and brace is the same 500gsm PVC and is fully reversible: when the front of the 669HG bib wears through from kneeling on concrete, turn it round and keep going.

Civil and roading crews

Civil and roading work means long days in the rain, often in trenches or on machinery. The 248G and 669HG pair handles the abrasion. If the job is more climbing in and out of diggers and trucks, the Stormtex-Air 203 jacket is lighter at 1.2kg, made from 340gsm stretch PVC, and has a hood that adjusts to fit over a hard hat.

Pressure washing and cleaning

Pressure washing puts water at you from every angle. The Stormtex-Air 652 bib and brace has double-layer PVC on the legs, knee pads, a high back and 38mm straps with industrial clips. Worn with the 203 jacket and its cuff extenders, the 652 bib keeps spray out at the wrists, chest and back.

Meat and food processing

In a processing plant, a heavy apron takes most of the spray. The 999ST apron is 650gsm oil-resistant PVC with 38mm elastic braces and a back divider, and is tested to −25°C, so the 999ST apron stays soft in a chiller. The 999HWST apron is 500gsm oil- and fat-resistant PVC with cross-back straps, is resistant to dairy sanitising chemicals and can be power washed. For forearms, the Stormtex-Air 230 PVC sleeves seal at the wrist with a welded latex cuff, and the N001 4mm and N002 3mm neoprene sleeves add warmth in cold rooms.

Council and utility crews

Council crews and utility workers often need one kit that covers drains, parks and roadworks. The 248G jacket and 669HG bib cover the heavier jobs, and the 203 jacket and 652 bib suit crews who are in and out of vehicles all day.

Heavy PVC vs lightweight rain jackets

Lightweight rain jackets are made for walking, not for site work. Heavy commercial PVC takes abrasion from concrete, steel and gravel, hoses clean, and does not rely on a coating that wears off.

Stormline lists the PVC weight on every product, so you can compare like with like: 340gsm stretch PVC on the Stormtex-Air range, 500gsm on the Stormtex range and 650gsm on the 999ST apron. Our PVC has a polyester or nylon backing, which dries quickly. Cotton-backed PVC that gets wet from sweat stays wet. All of the PVC gear in this guide is oil-resistant, which matters around diesel, hydraulic oil and animal fats.

Double-welded seams

Stitched seams leak because every stitch is a hole. Stormline PVC wet weather gear has double-welded seams, so the panels are joined without needle holes.

Welded seams also hold up better when you kneel, climb and twist all day, because there is no thread to wear through. On a bib and brace, the seams at the crotch and knees take the most strain, which is where cheap gear usually fails first.

The −25°C cold rating: no stiff gear on a frosty morning

Our PVC is lab tested to stay flexible down to −25°C / −13°F. If your wet weather gear is left in the site ute overnight during a Central Otago or South Island freeze, the PVC is still supple in the morning instead of frozen stiff.

Low-grade PVC goes hard in the cold and cracks at the elbows, knees and folds. Stormline PVC stays soft, so it bends without cracking when you climb out of the ute at 6am.

Sizing wet weather gear over layers

Order your normal size. Our jackets and bibs are cut with room for a hoodie, fleece or thermal underneath. On our product pages, the model wearing a size M is 175cm and 76kg. If someone in the crew is between sizes and wears heavy layers all winter, go up one.

Buying wet weather gear for a crew

Contractors, councils and processing plants can buy Stormline wet weather gear on wholesale terms. Send us the sizes and quantities, or log in to the wholesale store.

Where to buy Stormline wet weather gear in New Zealand

You can buy Stormline online or from stockists in both the North and South Island. Addresses and a map are on our store finder.

North Island

South Island

  • Nelson and Marlborough: Nelson Ranger (Picton), Quality Equipment (Nelson), Hendersons Ltd (Blenheim), Oddies Marine Equipment Specialists (Waikawa)
  • West Coast: North Beach Nets And Fishing (Greymouth), Promotional Solution And Safety (Westport)
  • Canterbury: Gourock (Christchurch), Independent Provedoring (Lyttelton), Pegasus Fishing Ltd (Lyttelton), Southshore Marine (Christchurch), The Front Store (Timaru), NZ Safety – Timaru (Timaru), The Front Store – Washdyke, Timaru (Timaru), Parr & Co (Timaru)
  • Otago: Port Chalmers Fishermans Co-Op (Port Chalmers), New Zealand Marine Logistics (Dunedin)
  • Southland: Riverton Fishermans Company (Bluff), Stormline Factory Shop (Invercargill), SES Direct (online) (Invercargill)

Frequently asked questions about wet weather work gear

What is the best wet weather work gear for building sites in NZ?

A heavy PVC jacket worn with a bib and brace. The Stormtex 248G jacket and Stormtex 669HG bib are 500gsm oil-resistant PVC, and the 669HG bib is reversible, so you can turn it round when the front wears.

What is the difference between 340gsm and 500gsm PVC rain gear?

The gsm figure is the weight of the PVC per square metre, so 500gsm PVC is heavier and more abrasion-resistant than 340gsm. The 500gsm Stormtex 248G and 669HG suit the hardest site wear, while the 340gsm stretch Stormtex-Air 203 and 652 are lighter and move more easily.

Can I wear the Stormtex-Air 203 jacket with a hard hat?

Yes. The Stormtex-Air 203 jacket has an adjustable hood that fits over a helmet, plus cuff extenders and large front utility pockets.

Will PVC wet weather gear go stiff if I leave it in the ute overnight?

Not Stormline PVC. Our PVC is lab tested to stay flexible down to −25°C / −13°F, so a jacket or bib left in the ute through a Central Otago frost is still supple in the morning.

Do Stormline PVC jackets and bibs leak at the seams?

Stormline PVC wet weather gear has double-welded seams, so the panels are joined without stitching. With no needle holes, there is nowhere for water to get through at the seams.

Which wet weather gear is best for pressure washing?

The Stormtex-Air 203 jacket with the Stormtex-Air 652 bib and brace. The 652 bib has double-layer PVC on the legs, knee pads and a high back, and the 203 jacket has cuff extenders to keep spray out at the wrists.

What should meat and food processing staff wear?

A heavy PVC apron and sleeves. The 999ST apron is 650gsm oil-resistant PVC tested to −25°C, the 999HWST apron is oil- and fat-resistant and can be power washed, and the Stormtex-Air 230 sleeves seal at the wrist with a welded latex cuff.

What size wet weather gear should I order?

Order your normal size, because Stormline jackets and bibs are cut with room for a fleece or thermal underneath. If you are between sizes and wear heavy layers all winter, go up one size.

Can I buy wet weather gear in bulk for my crew?

Yes. Contractors, councils and processing plants can buy on wholesale terms: ask us for a quote, or log in to the Stormline wholesale B2B store if you already have an account.

Buying for a crew?

We supply contractors, councils, processors and dealers on wholesale terms. Send us the sizes and quantities you need, or log in to the wholesale store.

Leave a Reply

Your email address will not be published. Required fields are marked *