The Stormtex 669O is a medium-weight orange PVC bib and brace from our commercial rain gear range. It’s made from 500 gsm PVC and is fully reversible: turn it back to front and the wear is shared between both sides, so it lasts longer. The loose cut leaves room for layers underneath. Inside the bib there’s a chest pocket, and stainless steel snaps at the ankles close the legs over rubber boots.
These bibs are made for outdoor work of all kinds: commercial fishing, farming, construction, power washing, angling and anything else that leaves you wet. Besides orange, the 669 comes in blue, yellow, green and white, so you can kit out a whole crew in matching Stormline bibs.
The 669O is cut to go with the matching Stormtex 248O jacket. Wear the two together and you have a full orange rain gear set.
Features
See the 669 bib in action
Ideal for
PVC bibs, bib and brace, or rain bib overalls?
Same garment, different countries. In the US most people ask for PVC bibs, rain bibs or bib overalls, and you’ll find them listed as commercial rain gear. Ask in the UK or Ireland and it’s a bib and brace, or bib & brace on a supplier’s price list. Australians and New Zealanders say bib and brace too, or just wet weather overalls. Whatever you call it, the 669O is a pair of waterproof pants (trousers, if you’re in the UK) with a high bib and shoulder straps, so rain and spray can’t get in at the waist when you bend over.
Our materials
Most of us have bought outdoor gear that looked fine in the store and then let water in, tore, and started falling apart within a season. Usually it’s the fabric or the seams that fail. After 60 years making rain gear, Stormline has learned that you can’t build good waterproof workwear out of poor material, so we keep a short list of fabrics and producers we trust.
The 669O uses single-layer 500 gsm PVC, about 14.7 oz per square yard. That puts it in the medium-weight class: tough enough for daily outdoor work and rough handling, but light and flexible enough that you aren’t fighting it all day. The base fabric is woven polyester or nylon, coated in PVC. Unlike cotton backing, it doesn’t hold sweat, and the finished fabric is completely waterproof and tear-resistant. Stormline adds a PU coating that keeps the fabric supple through years of rough use.
We’ve supplied these bibs to people in farming, fishing, construction, food processing, forestry, outdoor surveying, and commercial washing and cleaning. If the work keeps you out in wet weather and cold, medium-weight PVC bibs like these will keep you dry, and staying dry keeps you warmer.
Continue reading: industrial rain gear buying guide and crew orders
Heavy-duty or medium-weight industrial rain gear?
Treat industrial rain gear like a tool, not clothing. Whether you run a site crew or a pressure washing business, it has to keep people dry, let them move and keep them safe. Gear that’s poorly made or awkward to wear turns a long shift into a slog, and that shows up in how much work gets done. For most construction crews, medium-weight industrial rain gear is the better buy, because it’s the gear people actually keep wearing. Save heavy-duty rain gear for the roughest jobs.
Rain gear for pressure washing and jet washing
A pressure washing shift means long hours on your feet: leaning in, bending low, hauling hose. Spray comes from every angle, and there’s more of it than any storm will throw at you, so your rain gear has to seal it out without weighing you down. That’s where a medium-weight bib and brace like the 669O earns its place.
Bibs also have to survive the work itself. On a wash job, hoses drag across your shins and degreaser splashes your legs, which is why tough, oil-resistant PVC matters even more on bibs than on a jacket. The 669O’s PVC shrugs off both.
Build quality matters as much as fabric
Good commercial rain gear is built to take punishment on construction sites, in wash bays and out on deck in rough weather. Look for tough materials such as PVC, double-welded seams and hardware that won’t corrode, like the 669O’s stainless steel snaps. Cheap seams fail long before the fabric does.
Comfort keeps people working
Crews won’t wear bibs that fight them, and waterproof workwear only helps if it’s worn. A relaxed cut, straps that adjust and a fabric that bends easily all make rain gear less tiring over a full day. That’s why Stormline gave the Stormtex 669O room for layers and an adjustable harness.
Visibility on site
On a construction site, industrial rain gear has to keep you visible as well as dry. Bright orange PVC stands out against mud and concrete far better than navy or black, but without reflective tape it won’t do the job after dark. Where certified hi-viz is required, look for garments rated to the standard your site uses, with reflective tape in the right places, such as the Nelson 656HVY bib pants (ANSI Class E, EN 20471 Class 1), or a 982TNS hi-viz vest (Class 3 under both EN ISO 20471 and AS/NZS 4602.1) worn over your jacket. See our full range of hi-viz rain gear.
Choosing the right gear
Buying construction rain gear for a crew is about more than personal taste. Start with what your site rules require, then think about the work: kneeling, climbing, hose handling. The Stormline construction rain gear guide goes into more detail.
Where the 669O gets used
You’ll find the 669O and the rest of the Stormline commercial rain gear range on fishing boats, farms, building sites and with cleaning and power washing crews. Contractors buy it as everyday industrial rain gear. For more options, browse all our waterproof bib and brace, our wider waterproof workwear range, or foul weather bibs and pants.
Outfitting a crew
We sell wholesale, so if you’re equipping a whole team with commercial rain gear or other waterproof workwear, contact us about trade and wholesale pricing.
Why Stormline?
Stormline started in Southland, New Zealand, in 1966 making gear for commercial fishermen, and it’s still family-run, now by the third generation. Since then we’ve made PVC bibs, jackets, waterproof workwear and wet weather gear for construction, farming, fishing, marine and forestry work.
Part of how we’ve lasted six decades is listening. We talk regularly with the people who wear Stormline gear around the world and build in the details they ask for. On the Stormtex 669O that means a fully reversible bib, an adjustable H harness, an internal pocket, a loose fit for layers, and ankle snaps that close over boots. Read more about Stormline.
Frequently asked questions
Does the Stormtex 669O match the 248O jacket?
Yes. Both are made from the same orange, medium-weight 500 gsm Stormtex PVC, and the 669O bib and brace is designed to be worn with the 248O.
What does “reversible” mean on rain gear?
You can wear the bibs back to front. Turning them around spreads the wear, so a reversible pair lasts longer.
How heavy is the fabric?
The Stormtex 669O uses 500 gsm PVC, which is Stormline’s medium weight. It’s light enough to wear all day and tough enough for rough work.
Is the 669O only for fishing?
No. Stormline built the Stormtex 669 range as waterproof workwear for any wet job, not just fishing, so this bib and brace works as well on a farm or a construction site as it does on a boat. A lot of crews wear it as standard-issue commercial rain gear.
Is the 669O heavy-duty rain gear?
No, it’s medium weight, and that suits most construction and wash crews. Heavy-duty rain gear earns its extra weight on deck in heavy seas or for hydroblasting.
What sizes are available?
S to 4XL, with a relaxed fit for layering, so order your normal size. Check our sizing charts before ordering.
Are these good for pressure washing or jet washing?
Yes. The PVC is waterproof and oil resistant, and the ankle snaps close the legs over your boots so spray doesn’t run in.
How do I clean PVC bibs?
Hose your Stormline bibs down with fresh water after use, especially after salt water, fish or chemicals, and hang them to dry.

Reviews
There are no reviews yet